FLASHING NOKIA PHONE USING PHOENIX SERVICE SOFTWARE WITHOUT BOX

Flashing Nokia Phone Using Phoenix Service Software

Disclaimer

1. This article is only for educational purposes.

2. This tutorial is not for dummies and non-professional users.

3. This tutorial is tested on "Windows XP" & "Windows 7". (It's better to use "Windows XP")

4. This tutorial is based on "Phoenix 2011". May be different in other versions.

5. I am not responsible for damage to damage to your mobile. Try it with your own risk.

Preparation

1. In your PC :

*. Create Recovery Points Start> All programs> Accessories> System tools> System recovery. Name 'Before Flashing' Click Create.

*. Remove Nokia PC Suite, Nokia Software Updater, Nokia Care Suite, Nokia Modem Drivers, Nokia Connectivity Driver Through Control Panel> Add / Delete Programs, but don't delete the PC connectivity solution and Windows modem - Nokia.

*. Turn on your PC again.

*. Don't connect your cellphone before installing Phoenix software.

*. Disable all antiviruses, firewalls, anti-spyware, anti-malware etc.

*. Disable Screen Saver.

*. Check C: FilenokiaPhoenix Produk Program If you have a folder there Remove all.

2. In your mobile phone :

*. Back up all your mobile content because all your data will disappear after flashing. (If your cellphone dies, skip this step!)

*. If you protect your memory card with a password, then delete it.

*. Remove your memory card from your mobile.

*. Go to the Tool> Settings> Security> Phone and SIM.

- Set the PIN code request to OFF.

- Set the autolock period.

- Set the key code to the default password is 12345.

- Set the key if the SIM changes to No.

*. Delete your cellular antivirus installation. (If you have a few)

*. Fill in your mobile battery to at least 70% and continue to charge. (Although blinking only requires 7-10 minutes.)

Start flashing.

1. Install the Phoenix 2001 service software or newer:

 

*. The first extract of the archive that you have downloaded containing the Phoenix 2011 service software or the newer here

*. Install software. Be patient, maybe it takes a few minutes to install all the components.

*. Don't run Phoenix software after installation.

*. Connect your Nokia handset to your PC with a USB cable in PC Suite mode.

*. Windows will start installing the Connectivity Driver as soon as you connect the phone. Let it completely install.

- If this process fails then you must delete the PC connectivity solution. But don't worry we make restorable points before remembering.

- Restore your system and start delete the Nokia component again but don't remove the PC connectivity solution.

2. Install the offline firmware package that you download:

- If your firmware file is in .rar format, extract first using WinRAR on the desktop.

- On the desktop you will find the .exe file from your firmware file.

- Install the exe file. Don't change the path. This will install it to the default location C: File Program / Nokia / Phoenix / Product

- If you have downloaded the firmware file that does not have automatic settings, then simply copy the folder that is extracted manually in the C directory: File Program / Nokia / Phoenix / Product

- Make sure you install the updated firmware. You cannot lower your mobile firmware version on BB5 phones that include all new Nokia phones including N-series. (N82, N90, ....) (But there are still a few tricks!)

- Phoenix allows a decrease in ranking but your cellphone does not allow it because your cellphone has special security. So there's no point in trying it. You will get an error message.

For download the Nokia firmware here

3. Flashing procedure (update the latest firmware version):

- Open the Phoenix service software by double-clicking on the icon from your desktop.

- Connect your cellphone in PC Suite mode.

- In Phoenix, click File> Manage connection.

- Now click new.

- Now select the cable type you are using. If you use the DKE-2 cable, CA-53 [N-Series], select USB.

- Next click. This will find your product and say found. If you don't find it, you can try changing your cable type by clicking back.

- Click Next and then finish.

- Now your type of cable (USB) appears on the connection list. Choose. Click Apply and Thenclose.

- Now select File> Open product.

- List of RM codes will open. Select your mobile RM code. Like RM-133 for Nokia N73 or RM-84 for Nokia N70 and other Nokia with the appropriate RM type but choose one that suits your cellphone! Click OK. In this step if you receive an error, okay. Ignore it.

- Now select File> Scan products.

- Your mobile firmware info will appear at the extreme bottom of the Phoenix window.

- Now go to flashing> firmware update.

- A window will open.

- In that window click the Browse button (which with three points)

- A window will open with various products and various regions. Choose your chosen area or country according to the language package you want to install.

- Click OK.

- Click refurbish.

- Now flashing you actually started.

DO NOT TOUCH!

Don't touch your cellphone or press any key until flashing is complete.

Also don't touch your data cable and your computer system.

Remember don't touch! (Still touching?)

 

- In the end the Phoenix will tell you to delete your cellphone when flashing has been completed.

- Now wait for your phone to reboot into the latest firmware.

- The flashing procedure takes 7-10 minutes

4. Flash the dead cellphone [which only displays the white screen at startup]:

Note: You can install any firmware on the dead cellphone whether it's the latest and or old.

Note (again): You can make the phone die if you want! Just unplug your cable when blinking!

The procedure is almost the same as regular flashing.

 

- Start Phoenix. Connect your cellphone with a USB cable (phone dead now).

- Click File> Open product. Select your RM code from the window that appears. Click OK.

- Click File> Manage connections. Select No connection. Then apply and close.

- Now directly click Flash> Firmware update.

- A window will open. Click the Browse button. (Which with 3 points)

- A window will open with various products and various regions. Choose your chosen area or country according to the language package you want to install.

- This is a different part, check the "Dead Phone USB flashing" option.

- Click refurbish.

- Flashing has begun.

- After a few seconds blinking will pause and ask you to turn on your phone. (Or maybe not, it depends on the cellphone)

- Press your mobile power button until the backlight appears. Remember not to delete your cable or even delete it accidentally switch to your cellphone !!

- Flashing will continue.

- Your cellphone will start automatically when it's finished flashing.

When you finish you can safely delete your data cable from the phone. FINISHED!!!

5. extra

If you want to install another update to your phone after a few months, first delete the previous version that you installed in "C: Nokia / Phoenix / Phoenix / Product File"

 

Delete all product folder content before installing a new firmware.